Bias Tee & Power Supply Mounting Kit; Antenna Amplifier - GE ApexPro TT Technical Manual

Bias tee & power supply mounting kit

Antenna amplifier

2001989-351A
The mounting kit is for use with the following bias tee and power supply.
Part number
422766-001 Telemetry Power Supply
2001546-001 RF Bias Tee 650MHZ 75 Ohms
2014998-001 Power supply kit with bracket and bias tee
The power supply sits inside the bracket and two screws are provided for mounting
the bias tee to the front of the bracket.
For technical specifications, see
on page A-16.
The antenna amplifier is used to strengthen the antenna signal. A green LED on the
side indicates that the amplifier is receiving power. The antenna amplifier is DC
passing.
NOTE
Do not plug in backwards! Note the markings on the amplifier for installation
orientation. If connected backwards, the LED will illuminate, however the
amplifier will not work correctly: there will be signal loss instead of gain.
Part number
2001727-001 U.S. Antenna Amplifier (560–614 MHz)
2001727-002 International Antenna Amplifier (420-474 MHz)
ApexPro™
Description
Bias tee & power supply mounting kit specifications
Description
Replaceable parts
065A
070A
Status
Obsolete
Obsolete
6-5