Block And Terminator; 75-Ohm Terminator; Dc-Power Block; Splitters/Combiners - GE ApexPro TT Technical Manual

Block and terminator

75-Ohm terminator

DC-power block

Splitters/combiners

2001989-351A
The 75-ohm terminator is used to terminate all unused splitter/combiner and receiver
ports.
NOTE
The 75-ohm terminator must always be used with a DC power block.
Part Number Description
17100-001 75 Ohm Terminator
The DC-power block is used to isolate antenna system components that are not DC
passive, such as terminations and notch filters, from DC voltage.
Part Number Description
17102-001 DC Power Block
The splitters/combiners are used to combine antenna runs to create an antenna field or
used to split an antenna field to support multiple receiver systems.
ApexPro™
Replaceable parts
Drawing Status
Current
135A
Drawing Status
Current
140A
145A
6-9