Coaxial Cabling - Rg-6 And Rg-11; Connectors - GE ApexPro TT Technical Manual

Replaceable parts

Coaxial cabling - RG-6 and RG-11

Part number Coaxial type
4907-001 RG-6 Riser
4907-101 RG-6 Plenum
4908-001 RG-11 Riser
4908-101 RG-11 Plenum
2018505-001 RG-6 Riser
2018506-001 RG-6 Plenum
2018506-002 RG-6 Plenum
2018508-001 RG-11 Riser
2018507-001 RG-11 Plenum

Connectors

6-6
Part number
2001727-004
2001727-005
2001727-006
2001727-007
For technical specifications, see
Controlled-impedance cabling is used and 75-ohm RG-6 type is recommended.
Plenum- or riser-rated cable is used to meet NEC fire codes. RG-11 may be used if
cable lengths become long and dB losses become excessive.
dB loss/100 ft dB loss/100 ft
(dB loss / (dB loss /
30 meters) 30 meters)
@ 200 MHz @ 400 MHz
N/A 4.0
N/A 4.5
N/A 2.9
N/A 3.3
2.7 3.8
2.9 4.4
N/A 4.3
1.8 2.6
2.2 3.4
NOTE
For obsolete connectors, stripping dimensions for the associated cables are
shown in this section.
For current connectors, stripping dimensions for cables are shown in
guidelines on page
ApexPro™
Description
U.S. Cable Amplifier (560–614 MHz)
International Cable Amplifier (420-474 MHz)
U.S. Cable Amplifier (560–614 MHz)
International Cable Amplifier (420-474 MHz)
Antenna amplifier specifications on page
75 Ohm Cable
dB loss/100 ft dB loss/100 ft
(dB loss / (dB loss /
30 meters) 30 meters)
@ 600 MHz @1400 MHz
5.1 N/A
5.7 N/A
3.7 N/A
4.3 N/A
4.7 N/A
5.5 N/A
5.5 8.7
3.2 N/A
4.4 N/A
3-2.
Status
Obsolete
Obsolete
Current
Current
A-16.
075A
Ohms/1000 ft
(ohms / Status
300 meters)
31 Obsolete
7.5 Obsolete
12 Obsolete
12 Obsolete
6.4 Current
6.5 Obsolete
6.4 Current
2.6 Current
2.6 Current
Installation
2001989-351A