Required Equipment - Tektronix WFM5200 Technical Reference

Incoming Inspection

Required Equipment

Table 43: Required equipment – functional tests
Test equipment
Video test signal generator
75 Ω coaxial cables (2 required)
Precision 75 Ω terminator for Analog
Video
Waveform Monitor
30
The following equipment is required to perform the incoming inspection
procedure.
Requirements
1080p 59.94 3Gb/s HD signals (required
for option 3G)
100% color bars
4 CH embedded audio (Group 1)
1080i 59.94 1.5 Gb/s HD signals
100% color bars
10-bit shallow ramp matrix
100% sweep 1-15 MHz
4 CH embedded audio (Group 1)
525i 59.94 270 Mb/s SD signals
100% color bars
SMPTE color bars
8 CH embedded audio (Groups 1&2)
NTSC Composite Analog signals
0% Flat Field or Black Burst
1080i 59.94 SMPTE 372M Dual Link
signals
100% color bars, format YCbCr+A
4:4:4 10-bit
100% color bars, format GBR 4:4:4
10-bit
RG-6 type coaxial cable with male BNC
connectors, 1 to 2 meters long, suitable
for use to 1500 MHz.
75 Ω ±0.025% to 6 MHz, male BNC
connector.
SMPTE 259-C (270 Mb/s) and SMPTE
292M (1.5 Gb/s) inputs with EDH/CRC
checking.
WFM5200 Waveform Monitor Specifications and Performance Verification
Example
Tektronix TG700 with HD3G7 module
Tektronix TG700 with HDVG7 modules
Tektronix TG700 with DVG7 module
Tektronix TG700 with AVG7 module
Tektronix TG700 with HDLG7 module
Belden 8281 or 1694A. Tektronix part
numbers 012-0159-00 or 012-0159-01.
Tektronix part number 011-0102-03.
Tektronix WFM8300