Connectors; Sensor Info - wtw Oxi 3310 IDS Operating Manual

Operation
16

4.1.4 Connectors

1
3
1 Digital sensors (Oxygen)
2 USB B (device) interface
3 Service interface
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
WTW IDS sensors and IDS adapters meet these requirements.

4.1.5 Sensor info

You can display the current sensor data and sensor settings of a connected
sensor at any time. The sensor data are available in the measured value
display with the <F1>/[Info] softkey.
O
2
7.92
01.02.2014
Info
1. In the measured value display:
Display the sensor data (sensor name, series number) with [<F1>Info].
2
mg/l
25.0
°C
USB output
08:00
Oxi 3310 IDS (Oxi 3315)
ba75944e02 10/2014