Christie M Series User Manual page 57

Event
Lamp fault cleared
Fan stall
Fan no longer
stalled
Thermal sensor
warning
Thermal sensor
error
Thermal sensor OK
Projector powered
on (Standby to
Lamps On)
Projector powered
off (Lamps On to
Standby)
No video input
signal
Video input signal
detected
Lamp door open
Lamp door closed
5. Configure the Email notification.
When a trap occurs while email notification is selected for the event, an individual email is sent
to each user defined email recipient. The SNMP menu allows up to three email address (up to
64 characters in length) to request notifications from the system during a trap event.
The resulting email is in the following format:
From: <from@email.com>
To: <to@email.com>
Subject: Christie M Series Projector SNMP Notification
Message:
Projector Name: <projector name>
Location: <SNMP location>
IP Address: <IP address>
Description: <message>
Parameters: <param 1> = <param 1 value>; <param 2 > = <param 2 value>; ...
M Series User Guide
020-101948-02 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Message Parameters
(Email
Notification)
Description
Lamp fault has Lamp Number
been cleared
Fan stalled Fan Name
Fan stall cleared
Thermal sensor Thermal Sensor
warning Name
Thermal Sensor
Thermal sensor
Text
error
Thermal sensor OK
Projector turned on None
(lamps on)
Projector turned off
(lamps off)
No video input Frequency
signal
Video input signal
detected
Lamp door has Lamp Number
been opened
Lamp door has
been closed
Monitoring and maintaining the projector
Trap Config.
Menu Text
Fan Stall
Thermal Sensors
Power
Signal Lost/
Detected
Lamp Door
Default
Notification
Setting
Disabled
57