Selecting A Channel; Selecting An Input - Christie M Series User Manual

• An automatic channel is discarded unless one or more of its parameters are changed and will
not appear in the channel list (see below).
• If two channels have the same distinguishing source characteristics except for the reversal of
sync connectors (H-sync and V-sync, are switched), they are still defined as distinct channels.
• You cannot define a new channel without an incoming signal.

Selecting a channel

Learn how to select a channel.
1. Select a channel at any time by pressing Channel.
The current channel is highlighted in the channel list, or, if the current channel is hidden, the
first channel in the list is highlighted.
Channels created automatically do not appear in the channel list unless a parameter for the
channel has been changed.
2. To change to another channel, type the two-digit channel number or move the highlight to the
channel and press Enter.
3. To hide a channel from appearing in this list, edit the channel. Such a channel can still be
selected by entering its number as shown below.

Selecting an input

Learn the different methods for selecting an input.
To select an input, do one of the following:
• Press the INPUT key.
This displays a list of the four slots, with the card type and input signal type in each slot.
The currently selected input for the main image is highlighted. Scroll up or down through
the list and press ENTER to make a new selection. Press the INPUT key again to show the
list and allow the selection for the PIP/Secondary image. Repeatedly pressing the INPUT
key toggles between the main and PIP/Secondary image.
• Press the appropriate direct SLOT key to quickly display one of the inputs on the selected
slot to the main image. This does not bring up any menu selection, and is only applicable
for the main image.
• To select the source of the image for the main or PIP/Secondary image select Menu >
Input Switching and PIP > Main Input and Menu > Input Switching and PIP > PIP
Input.
The image is displayed according to the following:
M Series User Guide
020-101948-02 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Managing channels
25