Resizing And Positioning The Image - Christie M Series User Manual

Hide thumbs Also See for M Series:

Table of Contents

•

No resizing—Displays the image in its native resolution, which may or may not match the

resolution of the projector. For example, for a source with a native resolution of 800 x 600,

No Resizing in an SXGA+ projector uses the central 800 x 600 pixels and have a black

border. The black border areas are unused areas.

•

Full size—Uses all pixels for displaying the image, regardless of source or original aspect

ratio. Incoming source material having a different aspect ratio than the projector is

stretched for display.

•

Full width—Fills the display from left-to-right without changing the original aspect ratio of

the image. Depending on the source, data at the top and bottom may be discarded

(cropped), or the display may have black borders at the top and bottom (called "letter

boxed").

•

Full height—Fills the display from top-to-bottom. Depending on the source, this may

create borders.

•

Anamorphic—Displays an anamorphic image in its native 16:9 aspect ratio. The image

fills the screen from side-to-side and be centered between black bars at top and bottom.

Resizing and positioning the image

Change the size and location of the image.

1. Select Size and Position.

2. To control both the image width and height in tandem, maintaining the current aspect ratio of

the displayed signal data, adjust the Size.

M Series User Guide

020-101948-02 Rev. 1 (08-2018)

Adjusting the image

Table of Contents