Deleting A Channel - Christie M Series User Manual

through the Auto Source function. On-screen display of the channel list is an option that
must be set in the Menu Preferences menu.
• Auto Select—If checked, (default), the projector can automatically locate this channel
when an incoming input signal matches. If not checked, the projector can locate the
selected channel only when it is directly selected with Channel on the keypad; a change
in input signal does not result in a channel change.
• Locked—If checked, all of the image settings for this channel are locked. If unchecked
(default), all available image settings can be adjusted. You cannot use Auto Setup with a
locked channel.
• Previous—Channel Select this option to see or change Channel Edit settings for the
previous channel in the Channel Setup list.
• Next Channel—Select this option to see or change Channel Edit settings for the next
channel in the Channel Setup list.

Deleting a channel

Delete a channel when the settings for the input device are no longer required.
1. To activate the Select Channel Operation submenu, select Channel Setup, highlight a
channel, and press Enter.
2. To delete a single channel, highlight the channel, select Delete, and press Enter.
3. To delete all unlocked channels, select Delete Unlocked Only and press Enter.
4. To delete all channels, including those that are locked, select Delete All Channels and press
Enter.
5. In the confirmation dialog, click OK.
When deleting mutliple channels, the current channel remains but is redefined from projector
defaults.
M Series User Guide
020-101948-02 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Managing channels
27