Christie M Series User Manual page 15

On the remote keypad, enter the number that corresponds to the function menu you want to access,
such as 2 for the Image Settings menu. Or use the Up/Down Arrow Key on any keypad to highlight the
required option, then press Enter. The corresponding function menu or pull-down list of further
options appear.
With a function menu displayed, enter a menu option number for any numbered option, or use the Up/
Down Arrow Key to highlight the required option and then press Enter. Long menus have a scroll bar
on the right; use the arrow keys to access the remainder of the menu. Locked items or items that do
not pertain to the current action or condition appear dimmed and cannot be selected.
If no signal is present, all source-dependent adjustments are disabled. After 15 minutes of inactivity,
the projector leaves the menu system and returns to the presentation. When finished with a function
menu:
• To return to the previous screen press Exit.
• To leave the menu system and return to the presentation, press Menu.
When navigating the web interface, it is not recommended that you use the web browser navigation
functionality (such as, the Back and Forward functions) as this causes you to lose your web
connection. Christie recommends you navigate using the application interface and related functionality
detailed in this section.
A Secondary Tabs (specific to a primary tab) located
along the bottom of the Main window.
B Active Input Window section is read-only.
C These sections provide list selections.
D Primary Tabs located along the top of the Main
window.
M Series User Guide
020-101948-02 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
G Status Indicator displays the overall status of the
projector, based on the 12 categories of
information available.
Click the Status Indicator LED to display the
Status window and obtain more information about
any current errors and warnings.
H Logout button (located at the top right corner of
the web browser) is used to log you off of the web
user interface and the projector.
I Power section contains an On and Off button. Only
one is enabled depending on the current powered
state of the projector.
J Shutter section contains an Open and Close
button. Only one is enabled depending on the
current state of the projector's shutter.
Operating the projector
15