M Series Setup Personality - Christie M Series User Manual

• Show Personality—18 channels
• Nitro VIP Projector Yoke Personality—25 channels
You must properly configure the base channel (depending on which personality is used) correctly.
While the DMX specification allows for device overlapping, this may cause unwanted results. Below is a
table of how projectors should be configured (assuming that all projectors are to be controlled
independently and use the same personality):
Show personality (Correct)
Base channel
1
19
37
Setup personality (Correct)
Base channel
1
39
77
Show personality (Incorrect)
Base channel
1
1
12

M Series setup personality

Learn the channels and descriptions for this personality.
Channel Group
1 Safety
2 Video
3 Lens
M Series User Guide
020-101948-02 Rev. 1 (08-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
All projectors using Show Personality (Correct)
Projector 1 (18 ch)
Projector 2 (18 ch)
Projector 3 (18 ch)
All projectors using Show Personality (Correct)
Projector 1 (38 ch)
Projector 2 (38 ch)
Projector 3 (38 ch)
All projectors using Show Personality (Correct)
Projector 1 (18 ch)
Projector 2 (18 ch)
Projector 3 (18 ch)
Name Description
Slider Lock 0-171 Locked
172-255 Unlocked
Fade to/from 0-85 Black screen (Picture
Black mute ON)
172-255 Live Video (Picture
mute OFF)
Shutter 0-85 Shutter Closed (Black
Screen)
Default Notes
Value
255 No Channel changes are
applied when this control is
locked. Channel changes
made while the slider is
locked are applied once the
slider becomes unlocked.
255 To manually control the fade
to black time, the brightness
channel can be used to
achieve the same effect.
255
DMX/ArtNET
76