Table 20- 3 Branch Details - Siemens SCALANCE W1750D UI Configuration Manual

b3c65c...
b3c65c...
The output of this command provides the following information:
Table 20- 3
Parameter
Name
VC MAC
Address
Status
Inner IP
Assigned Subnet
Assigned Vlan
Key
Bid(Subnet Name)
Note
The command output does not display the Key and Bid(Subnet Name) details.
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
20.2 Configuring AP and Controller for AP-VPN Operations
1(10.15.205.0-10.15.205.250,5),2(10.15.206.1-10.15.206.252,5)
14(10.15.205.0-10.15.205.250,5),15(10.15.206.1-10.15.206.252,5)
Branch Details
Description
Displays the name of the branch.
Displays the MAC address of the VC of the branch.
Displays the current status of the branch (UP/DOWN).
Displays the internal VPN IP of the branch.
Displays the subnet mask assigned to the branch.
Displays the VLAN ID assigned to the branch.
Displays the key for the branch, which is unique to each branch.
Displays the Branch ID (BID) of the subnet.
In the example above, the controller displays bid-per-subnet-per-branch i.e., for
"LA" branch, BID "2" for the ip-range "10.15.205.0-10.15.205.250" with client
count per branch "5"). If a branch has multiple subnets, it can have multiple
BIDs.
If a branch is in UP state and does not have a Bid(Subnet Name), it means that
the AP is connected to a controller, which did not assign any BID for any subnet.
In the above example, "Paris-CB:D3:16" branch is UP and does not have a
Bid(Subnet Name). This means that either the AP is connected to a backup
controller or it is connected to a primary controller without any Distributed, L2 or
Distributed, L3 subnets.
AP-VPN Deployment
339