Configuring The Facebook Portal Page - Siemens SCALANCE W1750D UI Configuration Manual

In the CLI
To configure an account for captive portal authentication:
(scalance)(config)# wlan ssid-profile <name>
(scalance)(SSID Profile <name>)# captive-portal {<type>[exclude-uplink
<types>]|external [exclude-uplink <types>|profile <name>[exclude-uplink <types>]]}
(scalance)(SSID Profile <name>)# end (scalance)# commit apply
Example
The following example configures a Facebook account for captive portal authentication:
(scalance)(config)# wlan ssid-profile guestNetwork
(scalance)(SSID Profile "guestNetwork")# captive-portal facebook
(scalance)(SSID Profile "guestNetwork")# end
(scalance)# commit apply
13.6.3

Configuring the Facebook Portal Page

To bind the VC with the Facebook portal:
1. Open the SSID with the Facebook option enabled, navigate to the Security tab and click
the Facebook configuration link. The Facebook page is displayed.
Note
The link is displayed only if the AP is successfully registered with Facebook.
2. Log in with your Facebook credentials. The Facebook Wi-Fi Configuration page is
displayed.
3. Select the Facebook page.
4. Under Bypass Mode, select any of the following options:
– Skip Check-in link—When selected, the users are not presented with your business
– Require Wi-Fi code—When selected, the users are assigned a Wi-Fi code to gain
5. Customize the session length and terms of service if required.
6. Click Save Settings.
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
Facebook page, but are allowed to access the Internet by clicking the Skip Check-in
link.
access to the Facebook page.
Captive Portal for Guest Access
13.6 Configuring Facebook Login
185