Removing An Ap From The Network - Siemens SCALANCE W1750D UI Configuration Manual

8.9

Removing an AP from the Network

You can remove an AP from the network by using the SCALANCE W UI, only if the Auto-
Join feature is disabled.
In the SCALANCE W UI
To remove an AP from the network:
1. On the Access Points tab, click the AP to delete. The x icon is displayed beside the AP.
2. Click x to confirm the deletion.
Note
The deleted APs cannot join the SCALANCE W network anymore and are not displayed in
the SCALANCE W UI. However, the master AP details cannot be deleted from the VC
database.
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
Customizing AP Settings
8.9 Removing an AP from the Network
99