Siemens SCALANCE W1750D UI Configuration Manual page 501

(scalance)(nai-realm <name>)# nai-realm-auth-id-2 <authentication-ID>
(scalance)(nai-realm <name>)# nai-realm-auth-value-1 <authentication-value>
(scalance)(nai-realm <name>)# nai-realm-auth-value-2 <authentication-value>
(scalance)(nai-realm <name>)# nai-home-realm
(scalance)(nai-realm <name>)# enable
(scalance)(nai-realm <name>)# end
(scalance)# commit apply
You can specify any of the following EAP methods for the nai-realm-eap-method <eap-
method> command:
● identity - To use EAP Identity type. The associated numeric value is 1.
● notification - To allow the hotspot realm to use EAP Notification messages for
authentication. The associated numeric value is 2.
● one-time-password - To use Authentication with a single-use password. The associated
numeric value is 5.
● generic-token-card - To use EAP Generic Token Card (EAP-GTC). The associated
numeric value is 6.
● eap-tls - To use EAP-Transport Layer Security. The associated numeric value is 13.
● eap-sim - To use EAP for GlobaSystem for Mobile Communication (GSM) Subscriber
Identity Modules (SIM). The associated numeric value is 18.
● eap-ttls - To use EAP-Tunneled Transport Layer Security. The associated numeric value
is 21.
● peap - To use protected Extensible Authentication Protocol. The associated numeric
value is 25.
● crypto-card - To use crypto card authentication. The associated numeric value is 28.
● peapmschapv2 - To use PEAP with Microsoft Challenge Handshake Authentication
Protocoversion 2 (MSCHAPv2). The associated numeric value is 29.
● eap-aka - To use EAP for UniversaMobile Telecommunications System (UMTS)
Authentication and Key Agreement (AKA). The associated numeric value is 50.
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
Hotspot Profiles
33.2 Configuring Hotspot Profiles
501