Maintenance - Siemens SCALANCE W1750D UI Configuration Manual

6.2.2.5

Maintenance

The Maintenance link displays a window that allows you to maintain the Wi-Fi network. The
Maintenance
window consists of the following tabs:
● About — Displays the name of the product, build time, AP model name, the SCALANCE
W version, website address of Siemens, and copyright information.
● Configuration — Displays the following details:
– Current Configuration — Displays the current configuration details.
– Clear Configuration — Allows you to clear the current configuration details of the
– Backup Configuration — Allows you to back up local configuration details. The backed
– Restore Configuration — Allows you to restore the backed up configuration. After
● Certificates—Displays information about the certificates installed on the AP. You can also
upload new certificates to the AP database. For more information, see Uploading
Certificates (Page 238).
● Firmware—Displays the current firmware version and provides various options to
upgrade to a new firmware version. For more information, see Upgrading an AP
(Page 471).
● Reboot—Displays the APs in the network and provides an option to reboot the required
AP or all APs. For more information, see Upgrading an AP (Page 471).
● Convert—Provides an option to convert an AP to a Mobility Controller managed Remote
AP or Campus
AP, or to the default VC mode. For more information, see Converting an AP to a Remote AP
and Campus AP (Page 474) on page 350.
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
network.
up configuration data is saved in the file named instant.cfg.
restoring the configuration, the AP must be rebooted for the changes to take effect.
SCALANCE W User Interface
6.2 Main Window
55