Siemens SCALANCE W1750D UI Configuration Manual page 287

scope. For example, if 20 IP addressesare available in an IP address range configured
for a DHCP scope and a client count of 9 is configured, only a few IP addresses (in this
example, 9) from this range will be used and allocated to a branch. The AP doesnot allow
the administrators to assign the remaining IP addresses to another branch, although a
lower value is configured for the client count.
6. Click Next. The Static IP tab is displayed.
7. Specify the number of first and last IP addresses to reserve in the subnet.
8. Click Finish
In the CLI
To configure a Distributed, L2 DHCP scope:
(scalance)(config)# ip dhcp <profile-name>
(scalance)(DHCP Profile <profile-name>)# ip dhcp server-type <Distributed,L2>
(scalance)(DHCP Profile <profile-name>)# server-vlan <vlan-ID>
(scalance)(DHCP Profile <profile-name>)# subnet-mask <subnet-mask>
(scalance)(DHCP Profile <profile-name>)# default-router <IP-address>
(scalance)(DHCP Profile <profile-name>)# client-count <number
(scalance)(DHCP Profile <profile-name>)# dns-server <name>
(scalance)(DHCP Profile <profile-name>)# domain-name <domain-name>
(scalance)(DHCP Profile <profile-name>)# lease-time <seconds>
(scalance)(DHCP Profile <profile-name>)# ip-range <start-IP> <end-IP>
(scalance)(DHCP Profile <profile-name>)# reserve {first|last} <count>
(scalance)(DHCP Profile <profile-name>)# option <type> <value>
(scalance)(DHCP Profile <profile-name>)# end
(scalance)# commit apply
To configure a Distributed, L3 DHCP scope:
(scalance)(config)# ip dhcp <profile-name>
(scalance)(DHCP Profile <profile-name>)# ip dhcp server-type <Distributed,L3>
(scalance)(DHCP Profile <profile-name>)# server-vlan <vlan-ID>
(scalance)(DHCP Profile <profile-name>)# client-count <number>
(scalance)(DHCP Profile <profile-name>)# dns-server <name>
(scalance)(DHCP Profile <profile-name>)# domain-name <domain-name>
(scalance)(DHCP Profile <profile-name>)# lease-time <seconds>
SCALANCE W1750D UI
Configuration Manual, 02/2018, C79000-G8976-C451-02
DHCP Configuration
16.1 Configuring DHCP Scopes
287