l
lANDSJPl*lll_~~~~~~~~~
.
.
~
. CAM CHAIN ADJUSTMENT
2-9
Pad number verification steps:
•Install the new pad with the number down.
•Remove the adjusting tool.
•Recheck the valve clearance.
•If the clearance is incorrect, repeat all of the
clearance adjustment steps until the proper
clearance is obtained.
11. Install:
Reverse removal steps.
•Crankcase cover (Left)
•Cylinder head cover
•Horn
•Spark plugs
•Fuel tank
Screw (Crankcase Cover):
10 Nm (1.0 m•kg, 7.2 ft•lb)
Bolt (Cylinder Head Cover):
10 Nm (1.0 m•kg, 7.2 ft•lbl
Spark Plug:
18 Nm (1.8 m•kg, 13 ft•lb)
CAM CHAIN ADJUSTMENT
1. Remove:
•Crankcase cover (Left)
2. Turn crankshaft counterclockwise.
3. Align the timing plate "C" mark
CD
with the
upper pickup coil mark
@.