Signal System Test And Checks - Yamaha YX600S Service Manual

I
ELEC
I
§
I
SIGNAL SYSTEM
SIGNAL SYSTEM TEST AND CHECKS
Horn does not work .
OK
!
Poor
connection
I
Correct.
7. Check condition of each circuit for signal
system.
Refer to "SIGNAL SYSTEM TEST AND
CHECKS" section.
. - - - - - - - - - - - - - - - - - - - - - . N o voltage
Check for voltage (12Vl on "Br" lead at horn
terminal.
OK
. - - - - - - - - - - - - - - - - - - - - - . N o voltage
Check for voltage ( 12Vl on "P" lead at
"HORN" switch connector.
OK
r - - - - - - - - - - - - - - - - - - - - - . D i s c o n t i n u i t y
6-61
Check for continuity of "HORN" switch
when pushing "HORN" switch.
Continuity
Adjust horn, replace it damage.
Wiring circuit from fuse to horn ter-
minal is faulty, repair.
Horn is faulty, replace.
r----------------~
"HORN" switch is faulty, replace.