Yamaha YX600S Service Manual page 287

IAPPx[6~
I
MAINTENANCE sPEc1F1cAT10Ns
Part to be tightened Thread size
Tightening torque
Nm m•kg ft•lb
Front wheel axle M14x1.5 105 10.5 75
Front wheel axle holder M8 x 1.25 20 2.0 14
Front fender and front fork M6 x 1.0 80 8.0
58
Handle crown and inner tube M8 x 1.25 20
2.0 14
Handle crown and steering shaft M14x1.25
54 5.4 39
Steering shaft and ring nut (Refer to NOTE) M25x 1.0 38 3.8 27
Caliper and front fork M10x 1.25 35 3.5
25
Brake disc and wheel
M10x1.25 20 2.0
14
Master cylinder and master cylinder bracket M6 x 1.0 8 0.8 5.8
Master cylinder and master cylinder cap M5 x0.8 2 0.2 1.4
Caliper and bleed screw M8 x 1.25 6 0.6 4.3
Brake hose
M10x 1.25 26 2.6 19
Handlebar upper holder
M8 x 1.25 20 2.0 14
Engine mounting: Front upper
M10x1.25 42 4.2
30
Front under M10x1.25 42 4.2 30
Rear M12x1.25 70 7.0 50
Engine stay and frame M8x 1.25
20 2.0 14
Muffler bracket and frame
M10x1.25 42 4.2 30
Footrest M12x1.25 70 7.0 50
Brake pedal and brake shaft M6 x 1.0 9 0.9 6.5
Pivot axle and locknut M14x1.5 90 9.0 65
Rear shock absorber and frame M8 x 1.25 20 2.0 14
Rear shock absorber and rear arm
M10x 1.25 29 2.9 21
Tension bar and rear arm M8 x 1.25 20 2.0 14
Tension bar and brake shoe plate
M8 x 1.25 20 2.0 14
Rear wheel axle and nut M14x 1.5 106 10.6 75
Sproket and clutch hub M8 x 1.25 32 3.2 23
NOTE:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After torquing the steering shaft and ring nut, adjust them for smooth movement of the handlebar.
7-15