Starting Circuit Operation - Yamaha YX600S Service Manual

I
eLec
I a I
ELECTRICAL STARTING svsTEM
STARTING CIRCUIT OPERATION
The starting ciurcuit on this model consists of the
starter mater, starter relay, starting circuit cut-off
relay, and sidestand relay.
If the engine stop switch and the main switch are
both on, the starter motor can operate only if:
•The transmission is in neutral (the neutral switch
is on).
•The sidestand is up (the sidestand switch is on)
and clutch lever is pulled in (clutch switch is on).
CD
Battery
(2)
Starter motor
@
Starter relay
@
Starting circuit cut-off relay
@
To "ENGINE STOP" switch
@
To main switch
(!)
"ST ART" switch
@
Clutch switch
®
Neutral switch
®
Sidestand switch
@
Sidestand relay
@
To ignitor unit
6-7
@
Turn main switch to "ON"
and
"ENGIE STOP" switch to "RUN"
Transmission is
Push starter switch:
Engine will start
Sidestand is up.
Sidestand is up and
pull in clutch lever
Push starter switch:
Engine will start
Motorcycle can be ridden
@
~
X X X I
WHEN THE TRANSMISSION IS IN
NEUTRAL.
~
I I
I I WHEN THE SIDESTAND IS UP AND
- CLUTCH LEVER IS PULLED IN.