Yamaha YX600S Service Manual page 210

I
ELEc
I
e I
ELECTRICAL STARTING svsTEM
6-11
5. Connect battery positive (
+)
lead and start-
er motor lead; use heavy duty jumper lead
G).
WARNING:
This test should be perfomed within a few
seconds to prevent further damage. Also,
there should be no flammables close to the
starter relay.
Starter motor
runs
l
Starter motor
does not run
Inspect and repair the starter motor.
Refer to "ST ARTER MOTOR" section.
6. Starter relay conduct check
•Disconnect starter relay leads (Blue/White,
Red/White) and connect them to battery
positive and negative lead use a jumper
leads.
CD
Positive lead
~ Negative lead
Starter motor
runs
l
Starter motor
does not run
Starter relay is faulty, replace it.
7. Starting circuit cut-off relay conduct check
•Remove relay assembly
G).