Yamaha YX600S Service Manual page 28

I
IANDSJP
I~
I
ENGINE OIL REPLACEMENT
~
~~~~~~~~~~~~~~~~~~~~~~~~~~~-
324-007
Recommended Oil:
At 5°C (40°F) or Higher:
Yamalube 4-cycle Oil or
SAE 20W40 Type SE Motor Oil
At 15°C (60°F) or Lower:
SAE 10W30 Type SE Motor Oil
6. Install:
•Oil filler cap
With Filter Change
1 . Warm up the engine for several minutes, then
place a receptacle under the engine.
2. Remove:
•Oil filler cap
•Drain plug
CD
Drain the engine oil.
3. Remove:
•Oil filter bolt
CD
•Filter cover
CZ)
•Oil filter
@
4. Install:
•Drain plug
•Oil filter (New)
•Plain washer
•Spring
•Filter cover
•Oil filter bolt
NOTE:
~~~~~~~~~~~~-
Be sure the 0-ring
CD
is positioned properly.
Drain Plug:
43 Nm (4.3 m•kg, 31 ft•lb)
Oil Filter Bolt:
15 Nm (1.5 m•kg, 11 ft•lb)
2-14