Front Fork Oil Change - Yamaha YX600S Service Manual

FRONT FORK OIL CHANGE
r~g~ 1~
1
354-014
WARNING:
Do not allow any oil to contact the disc brake
components. If oil is discovered, be sure to
remove it, otherwise diminished braking
capacity and damage to the rubber com-
ponents of the brake assembly will occur.
7. Inspect:
•O-ring (Cap bolt)
CD
•Gasket (Drain screw)
Wear
I
Damage-+ Replace.
8. Install:
•Drain screw
•Gasket
9. Fill:
•Front fork
Recommended Oil:
Yamaha Fork Oil 10WT or
Equivalent
For Oil Capacity (Each Fork):
320 cm 3 (11.3 Imp oz, 10.8 US oz)
10. After filling pump the forks slowly up and
down to distribute the oil.
11. Tighten:
•Cap bolt
•Bolt (Handle crown)
Cap Bolt:
23 Nm (2.3 m•kg, 17 ft•lb)
Bolt (Handle Crown):
23 Nm (2.3 m•kg, 17 ft•lb)
12. Install:
•Handlebar
NOTE:
~~~~~~~~~~~~~
The upper handlebar holder should be installed
with the punched mark
CD
forward.
2-28