You can modify RIP Global Parameters by checking boxes as desired.
RIP Interfaces
To define and display RIP interfaces, select
The RIP Interfaces window opens.
The following parameters are displayed:
Avaya G350 Manager User Guide
Table 16-7. RIP Global Parameters (Continued)
Field
Redistribute OSPF
into RIP
Redistribute Static
into RIP
Update Interval
(seconds)
Route Invalidate
Timeout (seconds)
Figure 16-10. RIP Interfaces Window
Table 16-8. RIP Interface Parameters
Field
Interface Name
Description
Controls redistribution of routes from OSPF to
RIP. If checked, all routes learned via OSPF are
advertised into RIP.
Controls redistribution of static routes into RIP.
If checked, the static routes inserted into the IP
Routing Table are advertised into RIP, according
to the "Leak Route" definition for each static
route.
The amount of time between each RIP periodic
update.
The amount of time after which a route
becomes invalid in the routing table.
IP Route > RIP > RIP Interfaces
Description
The name assigned to the selected IP interface.
IP Route
.
175