Avaya G350 User Manual page 177

You can create, modify, or delete Routing Table static entries. For more
information on editing tables, refer to
* Note: Only static entries in the Routing Table can be modified.
Avaya G350 Manager User Guide
Table 16-3. Routing Table Parameters (Continued)
Field
Protocol
Redistribute
Cost
Permanent
Static Preference
Route Type
Route Age
Entries learned from OSPF, RIP, or local cannot be modified.
Description
The protocol through which the route was
learned. The following protocols can be
specified:
• Static - The route was manually configured
to this device.
• Local - The route represents a directly
attached net/subnet and corresponds to
one of the IP interfaces configured to this
device.
• - The entry was learned from the RIP
RIP
protocol.
• OSPF - The entry was learned from the
OSPF protocol.
If checked, static entries are advertised by RIP
and OSPF. If unchecked, static entries are not
advertised.
Number of hops to the destination network, or
the cost of the route for OSPF routes.
The permanence status of the route. Possible
statuses are:
• Checked - The route is not disabled when
a link on the route is down.
• Unchecked - The route is disabled when a
link on the route is down.
The preference of this route. Possible values are:
• low - Dynamic routes are preferred on this
static route.
• - This static route is preferred on
high
dynamic routes.
The type of route, either local or remote.
The number of seconds since the route was last
updated.
"Editing Tables" on page
IP Route
157.
167