Avaya G350 User Manual page 187

* Note: In the Send field, selecting '
You can modify RIP interfaces. For more information on editing tables,
refer to
Avaya G350 Manager User Guide
Table 16-8. RIP Interface Parameters (Continued)
Field
Cost
Default Route Metric
Default Route Mode
Split Horizon
Auth Type
Auth Key
prevent updating the
"Editing Tables" on page
Description
The cost of using this interface. RIP chooses the
route with the lowest total cost (metric) for
each destination.
The metric of the default route entry in RIP
updates originated on this interface, if
configured to
SendDefaultOnly
If , accepts default route entries in RIP
talk-listen
messages received from other routes on this
interface. If talk-only , does not accept default
route entries in RIP messages received from
other routes on this interface.
The method for handling routes learned from
this interface, when sending updates to this
interface. Possible methods are:
•
Poisoned Reverse
advertised to this interface as unreachable.
• - The routes are not
Split Horizon
advertised to this interface at all.
• None - The routes are advertised to this
interface as is.
Authentication Type. Possible methods are:
• None
• Simple
The password for this interface. This is only
used if the Auth Type is set to
The password may contain up to 16 characters.
It may be configured here, but not viewed.
listen-only
Default Route Metric
157.
IP Route
.
- The routes are
Simple-password
' or ' ' will
talk-listen
field.
.
177