Usp - Frame Relay Interface - Avaya G350 User Manual

Chapter 7

USP - Frame Relay Interface

For USPs configured with a frame relay interface, the USP dialog box
contains five tabs:
92
Table 7-10. USP Configuration - PPP Parameters (Continued)
Field
IPCP Status
• Serial Port - Basic information abut the USP. For information on
the fields in the Serial Port tab of the USP - Frame Relay dialog
box, refer to "Serial Port" on page
• Advanced - Information about the channels that comprise the
interface. For information on the fields in the Advanced tab of the
USP - Frame Relay dialog box, refer to
• Frame Relay - Information about the frame relay configuration
on the USP.
• Sub-Interfaces
frame relays.
• DLCIs - DLCI information for the Channel Group.
Description
IP Control Protocol. The state of IPCP for this
PPP session. IP packets can only be transmitted
and received over the PPP session when the
IPCP status is Open. Possible statuses include:
• Open
• Not-Opened
84.
- Information about the Channel Group's sub-
"Advanced" on page
Avaya G350 Manager User Guide
88.