Avaya G350 User Manual page 61

RTCP Monitoring
RTCP is an IP protocol that is used to monitor the quality of RTP packets.
Quality is measured in terms of delay, jitter, and packet loss.
If RTCP monitoring is enabled, the VoIP engines send RTCP packets to the
RTCP monitor. You must configure an IP address for the RTCP monitor,
and determine intervals at which the RTCP data is checked.
The following table lists the RTCP monitoring fields and their descriptions.
RSVP
RSVP is a protocol that signals the router to reserve bandwidth.
If RSVP is enabled, the Media Gateway tries to reserve a specific amount
of bandwidth per call session. If this fails, the Media Gateway tries to
reallocate the bandwidth during the call session.
The following table lists the RSVP fields and their description.
Avaya G350 Manager User Guide
Table 6-3. VoIP resources - RTCP monitoring Parameters
Field
Monitoring enabled
IP address
Port
Report Period
Table 6-4. VoIP resources - RSVP Parameters
Field
RSVP Enabled
Description
The status of RTCP monitoring.
• Checked - RTCP monitoring is enabled.
• Unchecked - RTCP monitoring is
disabled.
The IP address of the RTCP monitor.
The port monitored by RTCP.
The interval for RTCP reports.
Description
The Status of RSVP usage.
• Checked - The Media Gateway will try to
reserve bandwidth per call. If it fails, the
Media Gateway will try again during the
call.
• Unchecked - RSVP is not enabled.
VoIP Engine Configuration
51