Avaya G350 User Manual page 52

Chapter 5
MG Config
The MG Config tab provides information about the Media Gateway QOS
parameters.
The following table lists the fields in the MG Config tab of the Module
Configuration dialog box and their descriptions.
42
Table 5-1. MG Config Parameters
Field
QoS Control
DSCP
Figure 5-1. MG Config Tab
Description
The source of QoS control. This parameter can
only be changed via the CLI. Possible values are:
• Local - The processor is using the local
QoS parameters. The 802 priority and
DSCP fields can be configured.
• Remote - The processor is receiving QoS
parameters from a remote Media Gateway.
All QoS parameters are read only.
Priority based on a technology by which packets
are marked in the IP header Type of Service
(ToS) byte as belonging to a specific class.
Possible values are 0 - 63.
Avaya G350 Manager User Guide