Avaya G350 User Manual page 21

Selected ports can be configured using the Get/Set Toolbar. To change the
configuration of a port, click the button that represents the value of the
parameter you want to apply to the port. Click
with the changes. Click
applicable to the selected port are greyed out.
Multiple ports can be simultaneously configured using the Get/Set
Toolbar. When multiple ports with non-identical configurations are
selected, only the parameters whose settings are identical on the selected
ports are reflected in the Get/Set Toolbar. For example, if a port operating
at full duplex and a port operating at half duplex are selected, neither of
the duplex mode buttons on the Get/Set Toolbar are depressed.
The table below displays the buttons on the Get/Set Toolbar and explains
their functions and settings.
* Note: The Apply/Cancel buttons only appear when changes are
You can toggle the display of the Get/Set toolbar. To toggle the display of
the Get/Set toolbar, select
Avaya G350 Manager User Guide
Button Description
Get and set the port's speed: 10 Mbps, 100 Mbps,
1000 Mbps.
Get and set the port's status: Enabled, Disabled.
Get and set the port's mode: Half duplex, Full duplex.
Get and set the port's auto-negotiation status:
Auto-negotiation Enabled, Auto-negotiation
Disabled.
Get and set the port's STP mode: Enabled, Disabled.
Get and set the port's Power over Ethernet
Get and set the port's priority. Select a priority level
between 1 and 8 using the pull-down listbox.
Apply or cancel the configuration changes made with
the Get/Set Toolbar.
made to the configuration.
cancel to discard the changes. Options not
Table 2-2. Get/Set Toolbar
View > Toolbars > Show Get/Set Toolbar
Device Manager
to update the device
apply
.
11