Avaya G350 User Manual page 96

Chapter 7
86
Table 7-8. USP Dialog Box - Serial Port Parameters (Continued)
Field
Encapsulation
Idle characters
Bandwidth (kb/s)
Administrative Status
VoIP Queue
Description
The encapsulation method for channel groups
on the port. Possible methods include:
• PPP
• Frame Relay
The bit pattern used to signify an idle line.
Possible patterns include:
• Flags
• Mark
The configured bandwidth of the port in kilobits
per second.
The state of the selected port. Possible values
are:
• Enable - The port is enabled and can
transmit and receive packets.
• Disable - The port is disabled and cannot
transmit or receive packets.
The state of VoIP queuing on the PPP session.
VoIP queuing changes the length of the high
priority queue providing support for the
configuration of a maximum VoIP delay.
Possible states include:
• On - VoIP queuing is active on the PPP
session. This enables the device's queues to
optimally service VoIP applications.
• Off - VoIP queuing is not active on the PPP
session.
Avaya G350 Manager User Guide