Avaya G350 User Manual page 107

To modify the parameters of a Sub-Frame-Relay interface:
To delete a Sub-Frame-Relay interface:
* Note: You can only delete Sub-Frame-Relay interfaces on which no
The following table provides a list of the fields in the Sub-Interfaces tab of
the USP dialog box and their descriptions:
Avaya G350 Manager User Guide
2. Enter the parameters for the Sub-Frame-Relay interface using the
fields at the bottom of the dialog box.
3. Click Apply . The Sub-Frame-Relay interface is created.
1. Click the Sub-Frame-Relay interface you want to modify. The
configuration parameters of the selected Sub-Frame-Relay
interface appear in the bottom of the dialog box.
2. Modify the parameters you want to change using the fields at the
bottom of the dialog box.
3. Click . The Sub-Frame-Relay interface parameters are
Apply
modified.
1. Click the Sub-Frame-Relay interface you want to delete.
IP interfaces are defined.
2. Click . A confirmation dialog box opens.
Delete
3. Click Yes .
4. Click . The Sub-Frame-Relay interface is deleted.
Apply
Table 7-12. USP Dialog Box - Sub-Frame-Relays Parameters
Field
Name
Description
Type
Bandwidth
Description
The name of the Sub-Frame-Relay interface.
A user defined description of the
Sub-Frame-Relay.
The provisioning of the Sub-Frame-Relay
interface. Possible values are:
• Point to point
• Point to multipoint
The bandwidth of the Sub-Frame-Relay
interface in bits per second.
WAN Configuration
97