Alpha ESS Storion-SMILE5 Installation Manual page 35

Figure 66 Solar Setting Interface
Step 4: Set on-grid capacity, storage
capacity and number of PV strings
(MPPT number).
Figure 68 SOC Calibration Interface
Step 6: Check SOC Calibration function
set No.
Figure 70 Grid Setting Interface
Step 8: Click the Grid Function to set up
relevant parameters about the grid
Figure 72 System Mode Setting Interface
Step 10: Click Function-System Mode to
set system mode: DC, AC, Hybrid.
___________________________________________________________________
Figure 67 Battery Model Interface
Step 5: Click the Battery Function and
check battery type SMILE5-BAT.
Figure 69 Battery Ready Interface
Step 7: Check
function set No. If you only use the
inverter without battery, please set it Yes.
Figure 71 Max. Feed in rate Setting Interface
Step 9: Set the Max. Feed in rate value.
Figure 73 Work Mode Setting Interface
Step 11: Click the mode then set up work
mode.(self-use or force time charge)
Alpha ESS Co., Ltd.
Your Smart Energy
the Battery Ready
Page 34 of 40