Alpha ESS Storion-SMILE5 Installation Manual page 22

Your Smart Energy
communication cable, ethernet communication cable and then close the cable
box cover. The installation is now complete.
NOTE: the RCD unit must be installed. A 100mA RCD device is
recommended.
Figure 29 DIP Operation
Step 20: Open battery housing case and remove DIP baffle, set the DIP switch
2 to "on" mode at the bottom of the module. Then close the DIP baffle and
battery housing case.
NOTE: only the farthest battery from inverter need to set DIP.
If you want to add more batteries, please install the extra ones by the side as
shown below.
Figure 30 Increase the Battery Modules
___________________________________________________________________
Alpha ESS Co., Ltd.
Page 21 of 40