Step 5: Printing Tests And Normal Cleaning; After Daily Operations; Step 6: Turning The Power Off - Roland VersaUV LEF-200 First Step Manual

First Time Printing
STEP 5: Printing Tests and Normal Cleaning after Daily
Operations
Make sure to check for dot drop-out by performing printing tests after daily operations. If dot drop-out is
present, perform normal cleaning.
" "STEP 3: Printing Tests and Normal Cleaning" (P. 41)
If problems such as dot drop-out persist even after you have performed normal cleaning several times,
perform medium or powerful cleaning.
" "Periodic Cleaning Maintenance" (Master Guide)
NOTE
Frequently clean the inside of the machine using a vacuum cleaner or by wiping with a cloth moistened
with water then wrung dry. If dust and dirt accumulate in the machine, they are likely to affix to printed
materials.
" "About Care and Maintenance of the Inside of the Machine" (Master Guide)

STEP 6: Turning the Power Off

NOTE
• Never switch off the main power. Leaving the main power on enables the automatic maintenance to be
carried out periodically. If the automatic maintenance is not carried out, the printer may malfunction. For
example, the print heads may be damaged.
• Never switch off the main power or unplug the power cord suddenly while operation is in progress. Doing
so may damage the print heads. Be sure to first switch off the sub power. If the main power is accidentally
switched off, immediately turn the main power and sub power back on.
48
Hold down the sub power button for one
second or longer.
The sub power turns off. Turn off the sub
power after printing is complete.