Step 4: Attaching The Pad Tray - Roland VersaUV LEF-200 First Step Manual

STEP 4: Attaching the Pad
tray
The pad tray prevents discharged fluid from
entering the machine when discharged fluid
spills from the drain bottle.
MEMO
When the pad tray gets dirty, replace it with
a spare pad tray (included) as needed.
1.
Open the panel cover.
Remove the screw on the top of the panel
cover, and then pull out the panel cover in the
direction indicated by the arrow.
2.
Detach the drain bottle.
Prepare for Using This Printer
3.
Place the pad tray on the place where the
drain bottle was stored.
MEMO
Place the pad tray so that it is not creased or
loose. If the pad tray is creased or loose, it
will be difficult to install the drain bottle.
4.
Place the drain bottle on the pad tray, and
then install the drain bottle.
5.
Close the panel cover.
2
1
25