Roland VersaUV LEF-200 First Step Manual page 9

Danger of electrical short, electrical shock, or fire
WARNING
Connect the machine to an electrical outlet
that complies with this machine's ratings
(for voltage, frequency, and current).
Incorrect voltage or insufficient current may
cause fire or electrical shock.
Power rating
Never use this machine outside or in any
location where exposure to water or high
humidity may occur. Never touch the
machine with wet hands.
Doing so may result in fire or electrical shock.
Never allow any foreign object to get inside
the machine. Never expose to liquid spills.
Inserting objects such as coins or matches
or allowing beverages to be spilled into
the ventilation ports may result in fire or
electrical shock. If anything gets inside,
immediately disconnect the power cord and
contact your authorized Roland DG Corp.
dealer.
Never place any flammable object near
the machine. Never use a combustible
aerosol spray near the machine. Never use
the machine in a location where gases can
accumulate.
Combustion or explosion may occur.
Handle the power cord, plug, and electrical
outlet correctly and with care. Never use
any damaged articles.
Using a damaged item may result in fire or
electrical shock.
To Ensure Safe Use
WARNING
When using an extension cord or power
strip, use one that adequately satisfies the
machine's ratings (for voltage, frequency,
and current).
Use of multiple electrical loads on a single
electrical outlet or use of a lengthy extension
cord may cause fire.
Connect the machine to ground.
This can prevent fire or electrical shock
due to current leakage in the event of a
malfunction.
Position the machine so that the power
plug is within immediate reach at all times.
This is to enable quick disconnection of the
power plug in the event of an emergency.
Install the machine next to an electrical
outlet. Also, provide enough empty space
to allow immediate access to the electrical
outlet.
If sparking, smoke, a burning odor, an
unusual sound, or abnormal operation
occurs, immediately unplug the power
cord. Never use the machine if any
component is damaged.
Continuing to use the machine may result in
fire, electrical shock, or injury. Contact your
authorized Roland DG Corp. dealer.
Do not use the supplied power cord with
other products.
7