Roland VersaUV LEF-200 First Step Manual page 47

3.
Use this screen to fit the print data in the print area and adjust the position of the print data.
The white part in the layout area is the print area that was loaded in step 1. Print data that is not in the print
area will not be printed.
Select the "Fit to Media Size" check box to
adjust the print data to match the print area.
Select the "Center on the Media" check box
to place the print data in the center of the
print area.
* This is an example of the display when "Center on the Media" is selected.
MEMO
The orientation in the VersaWorks Dual screen display is the opposite of the actual print orientation.
Make sure the media orientation is correct.
Orientation on the VersaWorks Dual screen
Layout area
Actual print orientation
First Time Printing
Print area
45