Insert The Ink Cartridges For The Respective Colors - Roland VersaUV LEF-200 First Step Manual

Prepare for Using This Printer
5.
Remove the dummy cartridges, and then
press [ENTER].
Then, the screen shown below appears.
SET CL-LIQUID
34
6.
Use the removed SOL INK cleaning
cartridges to repeat steps 2 to 5.
Repeat until the screen shown below appears.
EMPTY
DRAIN BOTTLE
7.
Discard the discharged fluid, and then
reattach the drain bottle.
MEMO
For details on how to detach and attach the
drain bottle, see steps 1, 2, 4, and 5 in the
procedure in "STEP 4: Attaching the Pad tray"
(P. 25).
8.
Make sure the drain bottle is installed, and
then press [ENTER].
Then, the screen shown below appears.
SET CARTRIDGE
123456
Cleaning is finished.
30
2. Insert the Ink Cartridges for the
Respective Colors
NOTE
Be sure to hold the handle of the front cover
and open and close it gently.
1.
Before inserting ink cartridges, shake each
of them 50 times (about 15 seconds).
If ink components precipitate, it will not be
possible to print with correct colors. So that
the ink mixes well, shake the ink cartridge
horizontally with a stroke length of around 5
cm (2 in.) from each end of the ink cartridge.
2.
Insert the ink cartridge for each color.
Insert cartridge into the slot of the matching color.
The screen shown below appears.
FILLING INK...
>
EMPTY
DRAIN BOTTLE
3.
Discard the discharged fluid, and then
reattach the drain bottle.