Conditions For Usable Media - Roland VersaUV LEF-200 First Step Manual

Conditions for Usable Media

In this manual, the printing material used for output is called "media."
Media
Width
Maximum size Length
Thickness
Maximum weight
NOTE
• Do not use media that is charged with static electricity.
• This printer cannot print on all materials. When selecting media, be sure to carry out testing in advance to
make sure that satisfactory print quality can be obtained.
• There is a limit to the variation in the unevenness on the print surface.
" "Height Settings When the Print Surface is Uneven" (Master Guide)
• Depending on the type of media and the installation method, the height may not be set correctly. The
machine may malfunction if printing is performed under these conditions. Do not use the following types
of media.
Media that easily becomes loose
If the media becomes loose, the head gap
sensor cannot detect the height correctly. Be
sure to secure the media without looseness.
If the media becomes loose, you can use a
substance such as commercially available
adhesive tape to hold the media in place.
Condition
538 mm (21.2 in.)
360 mm (14.2 in.)
100 mm (3.94 in.)
5 kg (11 lb.)
Media made from soft material
If the media is made from soft material, the
pressure applied against the head gap sensor
is too weak. This prevents it from detecting the
height correctly.
First Time Printing
37