Installing The Ink Cartridges; Clean The Print Heads Using Sol Ink; Cleaning Cartridges - Roland VersaUV LEF-200 First Step Manual

Installing the Ink Cartridges

NOTE
• Insert each color ink cartridge into the
slot labeled with the matching color.
Inserting an incorrect cartridge may lead
to breakdowns. Therefore, exercise caution
when inserting cartridges. If you insert an
incorrect cartridge by mistake, contact your
authorized Roland DG Corp. dealer.
• Be sure to insert cartridges horizontally.
Otherwise, cleaning and filling may not be
performed properly.
Arrow
• Insert the cartridge so that the side with the
arrow faces up.
• Insert and remove cartridges slowly, one at
a time.
SET CL-LIQUID
12
Slot number
Prepare for Using This Printer
1. Clean the Print Heads Using SOL
INK Cleaning Cartridges
1.
Check that the following screen is displayed.
SET CL-LIQUID
12
2.
Insert SOL INK cleaning cartridges into the
slots whose numbers are displayed.
Then, the screen shown below appears.
SET DUMMY CRT.
SLOT 3 4
MEMO
The SOL INK cleaning cartridges are not
differentiated by color.
3.
Insert dummy cartridges into the slots
whose numbers are displayed, and then
press [ENTER].
Orient the side with a hole toward upper front.
The screen shown below appears.
FILLING INK...
>
4.
When the screen shown below appears,
remove the SOL INK cleaning cartridges.
REMOVE CL-LIQUID
12
Then, the screen shown below appears.
REMOVE DUMMY CRT
SLOT 3 4
29