Part Names and Functions
Printer Unit
Front
Head gap sensor
Used to detect the height
of media.
Cartridge slots
There are where ink
cartridges are installed.
Rear
18
Handle
Hold this handle to
open and close the
font cover gently.
Flat table
Link LED
This lights in green when the connection to the network is normal.
Status LED
This flashes in yellow while data is being received from the network.
Ethernet connector
This is used to connect the machine to a network.
Main power switch
Power-cord connector
Front cover
Keep this closed except
when necessary such as
when loading media.
UV-LED device
Panel cover
Drain bottle
Operation panel
"Operation Panel" (P. 19)
Carriage fan
Spins while printing.
Print-head carriage
The print heads are inside
this carriage.