Printable Area; Step 1:Turning The Power On - Roland VersaUV LEF-200 First Step Manual

First Time Printing

Printable Area

Maximum Printable Area: Width 508 × length 330 × thickness 100 mm (20 × 13 × 3.94 in.)
* The maximum printable area is inside the guide lines on the flat table.
* The maximum size of the media and the maximum printable area are different.

STEP 1:Turning the Power On

Close the front cover.
NOTE
Leave the main power switched on at all times.
Never switch off the main power. Leaving the main power on enables the automatic maintenance to be
carried out periodically. If the automatic maintenance is not carried out, the printer may malfunction. For
example, the print heads may be damaged.
Be sure to hold the handle of the front cover and keep holding it until the cover is
completely opened or closed.
If you do not open and close the front cover gently, it may break or you may be injured.
38
Flat table
(Front)
508 mm (20 in.)
Guide line
Media
Flat table
(Rear)
100 mm (3.94 in.)
Turn on the
main power.
Turn on the
sub power.