Perform Normal Cleaning - Roland VersaUV LEF-200 First Step Manual

First Time Printing

2. Perform Normal Cleaning

1.
Press [FUNCTION].
2.
Press [ ], then [ ].
The screen shown below appears.
FUNCTION
CLEANING
3.
Press [ ].
The screen shown below appears.
CLEANING
NORMAL CL.
4.
Press [ ] or [ ] to select the group of print
heads that is not to be cleaned (P. 41).
NORMAL CL.
AB
Group
5.
Press [ ] or [ ] to clear the group of print
heads that is not to be cleaned from the
display.
NORMAL CL.
AB
6.
Press [ENTER].
Normal cleaning starts. It takes about two to
three minutes.
CLEANING...
>>>>>
When finished, the screen shown below
appears again.
NORMAL CL.
AB
42
7.
Press [FUNCTION].
The display returns to the original screen.
W:508mm L:330mm
H:100.0mm
8.
Perform a printing test (P. 41) again
to make sure the dot drop-out has been
corrected.
If the problem persists, try performing
cleaning again.
If the printer has been used for a long period,
the problem may not be fixed even after
performing cleaning two or three times. If
this is the case, perform medium or powerful
cleaning.
" "Medium and Powerful Cleaning" (Master
Guide)
NOTE
UV ink will harden. It may adhere to the
print head and solidify. If left alone, ink may
clog the print heads and cause problems
including printer malfunctions.
Clean the head manually when printing
frequently with the print head at a distance
from the print surface. This is called manual
cleaning. To prevent clogging of the print
heads, you may have to perform manual
cleaning each time you print in some cases.
For more information, see "Manual Cleaning"
(Master Guide).