Roland VersaUV LEF-200 First Step Manual page 48

First Time Printing
4.
After you have adjusted the printing position, click [OK].
5.
Click .
Printing will be started.
When the printing ends, the screen shown below appears on the display screen of the printer.
FINISHED PRINT
Data from the computer is not accepted while this screen is displayed.
MEMO
If [PRT CONTINUE] is set to [ENABLE], the screen shown in the figure does not appear.
For more information, see "Continuously Outputting Print Data" (Master Guide).
6.
Press [ENTER].
The screen shown below appears again.
W:508mm L:330mm
H:100.0mm
Data from the computer can be accepted again.
46