Replacing Parts for Maintenance
Replacing the Wiper and the Tray Pad
The wipers and the tray pads are components that are used for cleaning the print heads.
When it is time to replace the wiper, the message [The time for wiper replacement has arrived.] ap-
pears. In this situation, replace the wiper and tray pad.
For information about purchasing wipers or tray pads, contact your authorized Roland DG Corporation
dealer or visit our website (http://www.rolanddg.com/).
WARNING
Be sure to perform operations as specified by the instructions, and never touch any area not
specified in the instructions.
Sudden movement of the machine may cause injury.
Wiper
Procedure
1.
When the message [The time for wiper replacement has arrived.] appears, tap [OK].
2.
Remove any media.
3.
Tap
to display the messages.
4.
Tap [The time for wiper replacement has arrived.].
The [Wiper Replacement] screen appears.
270
Replacing Consumable Parts
Required items
Tray pad
Tweezers