Table of Contents
Advertisement
9 R
C
EMOTE
ONTROL
C
OMMUNICATION INTERFACE
9
R
C
EMOTE
ONTROL
Communication interface
The OLP-88 is equipped with a USB 2.0 (Micro-B) device
interface for remote control via a PC. In order to operate the
OLP-88 via remote control it has to be connected to a PC with a
USB cable (see
"Accessories" on page
84).
Fig. 21
USB cable for connection to a PC
The required driver files for the PC can be downloaded from
http://scf.updatemyunit.net. See the Readme file provided with
the driver package for installation guidance.
General operation
The main purpose of the remote control capability of the
SmartClass™ Fiber family is to set and get Setup and Result
values from an application. More complex remote control
commands (called Extended Commands) providing extended
application functionality are also available.
In general SmartClass™ Fiber allows multiple applications
running on the system simultaneously. Hence there must be a
way to select an application to which the remote control
commands should be directed. Refer to
"Selecting an
application" on page 58
for more information.
In addition to the application-specific commands, there is a set
of Generic Commands which control the instrument itself,
independent from the currently selected application.
OLP-88
57
Hide quick links:
Advertisement
Table of Contents
