Viavi OLP-88 User Manual page 72

9 R C
EMOTE ONTROL
C
OMMANDS
Command string
:STOR:GRP:NAMES?
:STOR:NAMES?
:STOR:NOTE
<STRING>
:STOR:NOTE?
:STOR:WR:BUSY?
Command string
:APP:FACT:DEF
:MICR:CAL:INFO?
:MICR:MODL:NAME? Returns the model of the connected Digital Probe. Usually: "FBP-
:MICR:SER:NUMB?
:MICR:SW:VER?
:STOR:ALL:DEL
:STOR:DEL
<STRING>,
<STRING>,
<STRING>
72
Parameter type / Response type / Unit / Info
This setup contains the names of all available storage groups. The
"default" group is always available.
This setup contains the fiber IDs and internal IDs belonging to the
group specified by :STOR:GRP:NAME.
A user specific note which is stored with the measurement results.
Returns the stored user note.
Response Type:
<STRING>
See :STOR:NOTE command for more information.
Returns TRUE if a storage command is active. After saving the
measurement the value FALSE will be returned.
Response type:
<BOOLEAN>
Extended commands for the Probe application/PCM
application
Parameter type / Response type / Unit / Info
Sets all parameters of the application to their default values.
Returns the list of calibrations ("tips") of the connected Digital Probe.
Example of a list: (sf = supported fibers)
PCM: 2 active calibrations: [0], "Standard Tips (with BAP1)", sf=1;[1],
"Ribbon Tips", sf=2
P5000i"
Returns the serial number of the connected Digital Probe. For example
"B1712-8740-399".
Returns the firmware version of the connected Digital Probe. For
example "1.2.41.903".
Deletes all measurement entries and groups. Creates a new empty
"default" group.
:STOR:GRP:NAME is set to default.
Deletes a dedicated measurement result specified by group (string1),
fiber identifier (string2) and internal identifier (string3).
OLP-88