7 M
M
EMORY
ANAGEMENT
G
ENERAL INFORMATION
48
To change the data settings:
Before you start your measurements you should determine a
project and a prefix for your test scenario.
√
The homescreen is displayed.
1.
Press the [A] key.
2.
Tap the
[Data]
button.
3.
Tap the [Data
Settings]
Fig. 19 Data Settings menu
To create a project:
√
The homescreen is displayed.
1.
Press the [A] key.
2.
Tap the
[Data]
button.
3.
Tap the [Data
Settings]
4.
Tap the [Create
Project]
The project appears in all available applications.
To delete a project:
√
The homescreen is displayed.
1.
Press the [A] key.
2.
Tap the
[Data]
button.
3.
Tap the [Data
Settings]
4.
Tap the [Delete
Project]
assigned data.
The default project is always present and can't be deleted.
To use the Link Data Mode:
1.
Select one of your predefined projects.
2.
Determine a prefix for your test scenario. In case of saving
data, this prefix, attached with an incremental index, is used as
a file name.
button.
button.
button to determine a new project.
button.
button to delete a project with all
OLP-88